com.vmware.vcenter.namespace_management.networks package

Subpackages

com.vmware.vcenter.namespace_management.networks.nsx package

Submodules

com.vmware.vcenter.namespace_management.networks.edges_client module

class com.vmware.vcenter.namespace_management.networks.edges_client.Edge(id=None, load_balancer_address_ranges=None, haproxy=None, nsx=None, nsx_advanced=None, provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

Edge class contains configuration for network traffic entering and exiting a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str or None) – Edge.id is a unique identifier that can be referenced for updates. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.network.edge.Edge. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.network.edge.Edge. If unset, an ID will be automatically generated.
load_balancer_address_ranges (list of com.vmware.vcenter.namespace_management.networks_client.IPRange or None) – Edge.load_balancer_address_ranges defines the list of addresses that a load balancer can consume to publish Kubernetes services. This range must contain at least one IP address unless the AVI provider is selected. It is recommended to supply a large enough range to support load balancers requested for pods in the control plane and Tanzu Clusters. This attribute was added in vSphere API 8.0.0.1. This field must be set if Edge.provider is not an NSX Advanced Load Balancer,
haproxy (HAProxyConfig) – Edge.haproxy defines configuration for the HAProxy Load Balancer. This attribute was added in vSphere API 8.0.0.1. This attribute is optional and it is only relevant when the value of provider is EdgeProvider.HAPROXY.
nsx (NSXConfig) – Edge.nsx defines configuration for the NSX Load Balancer. This attribute was added in vSphere API 8.0.0.1. This attribute is optional and it is only relevant when the value of provider is EdgeProvider.NSX.
nsx_advanced (NSXAdvancedLBConfig) – Edge.nsx_advanced defines configuration for the NSX Advanced Load Balancer and Ingress Software. This attribute was added in vSphere API 8.0.0.1. This attribute is optional and it is only relevant when the value of provider is EdgeProvider.NSX_ADVANCED.
provider (EdgeProvider or None) – Edge.provider specifies the vendor providing edge services. This attribute was added in vSphere API 8.0.0.1. A provider is required to enable edge services for a cluster.

class com.vmware.vcenter.namespace_management.networks.edges_client.EdgeProvider(string)

Bases: vmware.vapi.bindings.enum.Enum

EdgeProvider describes the supported available edge services. An NSX edge are used on NSX-T networks, but “Advanced NSX” and HAProxy edges are used on VDS networks. This enumeration was added in vSphere API 8.0.0.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the EdgeProvider instance.

HAPROXY = EdgeProvider(string='HAPROXY'): EdgeProvider.HAPROXY is an HAProxy load balancer fronted by the Data Plane API. This class attribute was added in vSphere API 8.0.0.1.

NSX = EdgeProvider(string='NSX'): EdgeProvider.NSX specifies NSX-T managed edge services. This class attribute was added in vSphere API 8.0.0.1.

NSX_ADVANCED = EdgeProvider(string='NSX_ADVANCED'): EdgeProvider.NSX_ADVANCED specifies the NSX Advanced Load Balancer and Ingress. This class attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.HAProxyConfig(servers=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

HAProxyConfig class describes configuration for the HAProxy Load Balancer. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

servers (list of Server) – HAProxyConfig.servers is a list of the addresses for the data plane API servers used to configure Virtual Servers. This attribute was added in vSphere API 8.0.0.1.
username (str) – HAProxyConfig.username is used by the HAProxy Kubernetes Operator to program the HAProxy Controller. This attribute was added in vSphere API 8.0.0.1.
password (str) – HAProxyConfig.password secures the HAProxyConfig.username. This attribute was added in vSphere API 8.0.0.1.
certificate_authority_chain (str) – HAProxyConfig.certificate_authority_chain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.LoadBalancerSize(string)

Bases: vmware.vapi.bindings.enum.Enum

The LoadBalancerSize class enumerates load balancer sizes supported by NSX. This enumeration was added in vSphere API 8.0.0.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the LoadBalancerSize instance.

LARGE = LoadBalancerSize(string='LARGE'): LoadBalancerSize.LARGE is a load balancer that hosts up to 1000 virtual servers. This class attribute was added in vSphere API 8.0.0.1.

MEDIUM = LoadBalancerSize(string='MEDIUM'): LoadBalancerSize.MEDIUM is a load balancer that hosts up to 100 virtual servers. This class attribute was added in vSphere API 8.0.0.1.

SMALL = LoadBalancerSize(string='SMALL'): LoadBalancerSize.SMALL is a load balancer that hosts up to 20 virtual servers. This class attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.NSXAdvancedLBConfig(server=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

NSXAdvancedLBConfig class is used to describe the NSX Advanced Load Balancer configuration. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

server (Server) – NSXAdvancedLBConfig.server is the address for the Avi Controller, used to configure Virtual Servers. This attribute was added in vSphere API 8.0.0.1.
username (str) – NSXAdvancedLBConfig.username is used by the AVI Kubernetes Operator to program the Avi Controller. This attribute was added in vSphere API 8.0.0.1.
password (str) – NSXAdvancedLBConfig.password is the password for the username. This attribute was added in vSphere API 8.0.0.1.
certificate_authority_chain (str) – NSXAdvancedLBConfig.certificate_authority_chain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.NSXConfig(edge_cluster_id=None, default_ingress_tls_certificate=None, routing_mode=None, egress_ip_ranges=None, t0_gateway=None, load_balancer_size=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

NSXConfig class describes the configuration for NSX-T Edge services. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

edge_cluster_id (str or None) – NSXConfig.edge_cluster_id defines the NSX Edge Cluster to be used for Kubernetes Services of type LoadBalancer, Kubernetes Ingresses, and NSX SNAT. This attribute was added in vSphere API 8.0.0.1. Defaults to a the edge cluster created earliest.
default_ingress_tls_certificate (str or None) – NSXConfig.default_ingress_tls_certificate defines a default certificate that is served on Ingress services, when another certificate is not presented. This configuration applies to all namespaces by default. This attribute was added in vSphere API 8.0.0.1. If unset, there will be no certificate served on Ingress.
routing_mode (NSXRoutingMode or None) – NSXConfig.routing_mode enables the network topology in either NAT mode or Routed Mode. Enabling routed mode will result in all the workloads i.e vSphere PODs, VMs and Tanzu clusters Node IPs to be directly accessible from networks beyond the Tier-0 router. Once a namespace mode is applied, it cannot be changed. This attribute was added in vSphere API 8.0.0.1. The default setting is NAT mode.
egress_ip_ranges (list of com.vmware.vcenter.namespace_management.networks_client.IPRange) – NSXConfig.egress_ip_ranges lists the IP Ranges from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges must not overlap with other IP ranges on this network. This attribute was added in vSphere API 8.0.0.1. If this range is empty, network traffic will not be able to exit the cluster.
t0_gateway (str or None) – NSXConfig.t0_gateway specifies the default Tier-0 gateway ID for the namespaces configuration. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. If unset, the default Tier-0 gateway from the edge cluster is used.
load_balancer_size (LoadBalancerSize or None) – NSXConfig.load_balancer_size describes the load balancer sizing options available. Larger sizes support more active virtual servers, but consume more resources. This attribute was added in vSphere API 8.0.0.1. If unset, the size defaults to small.

class com.vmware.vcenter.namespace_management.networks.edges_client.NSXRoutingMode(string)

Bases: vmware.vapi.bindings.enum.Enum

NSXRoutingMode enum defines an enumeration of available routing modes. This enumeration was added in vSphere API 8.0.0.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the NSXRoutingMode instance.

NAT = NSXRoutingMode(string='NAT'): NSXRoutingMode.NAT uses network address translation and the NSXConfig.egress_ip_ranges to route traffic out of the cluster. This class attribute was added in vSphere API 8.0.0.1.

ROUTED = NSXRoutingMode(string='ROUTED'): NSXRoutingMode.ROUTED configures NSX-T to route directly to Pods cluster IP addresses. This class attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.Server(host=None, port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

A Server class represents an endpoint used to configure load balancers. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

host (str) – Server.host specifies a the management hostname or IPv4 address for a load balancer. This attribute was added in vSphere API 8.0.0.1.
port (long) – Server.port specifies a management port used to access a load balancer. This attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.edges_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.namespace_management.networks.nsx_client module

class com.vmware.vcenter.namespace_management.networks.nsx_client.DistributedSwitches(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The DistributedSwitches class provides methods to get the basic information of Distributed Switches. This class was added in vSphere API 8.0.0.1.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(compatible=None, zones=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DistributedSwitches.FilterSpec class contains attributes used to filter the results when listing Distributed Switches (see DistributedSwitches.list()). This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

compatible (bool or None) – Compatibility criteria. If true, only Distributed Switches compatible with the vSphere Namespaces will be returned. If false, only Distributed Switches incompatible with the vSphere Namespaces will be returned. This attribute was added in vSphere API 8.0.0.1. If None, both compatible and incompatible Distributed Switches will be returned.
zones (list of str) – Zone compatibility criteria. If zones are specified, the common distributed switches across the given zones will returned. A distributed switch is considered common if it is present in all of the vSphere clusters in a given zone. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.consumption_domains.Zone. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.consumption_domains.Zone.

class Summary(distributed_switch=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DistributedSwitches.Summary class contains the basic information about a Distributed Switch. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

distributed_switch (str) – Identifier of the switch. The value of this field refers to the UUID of a vim.DistributedVirtualSwitch. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: vSphereDistributedSwitch. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: vSphereDistributedSwitch.
name (str) – Human-readable identifier of the switch. This attribute was added in vSphere API 8.0.0.1.

list(filter=None)

Returns basic information of the Distributed Switches matching the DistributedSwitches.FilterSpec. This method was added in vSphere API 8.0.0.1.

Parameters: filter (DistributedSwitches.FilterSpec or None) – Specification of matching Distributed Switches for which information should be returned. If None, the behavior is equivalent to a DistributedSwitches.FilterSpec with all attributes None which means all Distributed Switches will be returned.
Return type: list of DistributedSwitches.Summary
Returns: List of Distributed Switches summaries matching the DistributedSwitches.FilterSpec.
Raise: com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.
Raise: com.vmware.vapi.std.errors_client.InvalidArgument if one or more fields of the DistributedSwitches.FilterSpec is incorrect.
Raise: com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.
Raise: com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management.networks.nsx_client.Edges(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Edges class provides methods to retrieve the basic information for NSX Edges. This class was added in vSphere API 8.0.0.1.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(compatible=None, distributed_switch=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Edges.FilterSpec class contains attributes used to filter the results when listing Edges (see Edges.list()). This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

compatible (bool or None) – Compatibility criteria. If true, only Edges which are compatible with vSphere Namespaces will be returned. If false, only Edges incompatible with vSphere Namespaces will be returned. This attribute was added in vSphere API 8.0.0.1. If None, both compatible and incompatible Edges will be returned.
distributed_switch (list of str) – Distributed switch UUID criteria. If distributed switches identifiers are specified, they will be used to filter the Edges. To obtain the available distributed switch UUIDs, use: DistributedSwitches.list(). This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: vSphereDistributedSwitch. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: vSphereDistributedSwitch.

class Summary(edge_cluster=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Edges.Summary class contains the basic information about an Edge. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

edge_cluster (str) – Identifier of the Edge. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXEdgeCluster. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXEdgeCluster.
name (str) – Human-readable identifier of the Edge. This attribute was added in vSphere API 8.0.0.1.

list(filter=None)

Returns a list of Edges matching the given filter. This method was added in vSphere API 8.0.0.1.

Parameters: filter (Edges.FilterSpec or None) – Specification of matching Edges for which information should be returned. If None, the behavior is equivalent to a Edges.FilterSpec with all attributes None which means all Edges will be returned.
Return type: list of Edges.Summary
Returns: List of Edge summaries matching the given filter.
Raise: com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.
Raise: com.vmware.vapi.std.errors_client.InvalidArgument if one or more fields of the Edges.FilterSpec is incorrect.
Raise: com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.
Raise: com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management.networks.nsx_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.namespace_management.networks.service_client module

class com.vmware.vcenter.namespace_management.networks.service_client.DNS(servers=None, search_domains=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

DNS describes DNS servers and search domains for a given network. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

servers (list of str) –
DNS.servers is a list of IP addresses that clients may use for DNS resolution on a given network in priority order.

If empty, no DNS servers will be configured.. This attribute was added in vSphere API 8.0.0.1.
search_domains (list of str) –
DNS.search_domains is a list of DNS search domains to be used on this network.

This field is useful for corporate networks or local domains that are not publicly resolvable.

If empty, no search domains will be configured.. This attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.service_client.NTP(servers=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

NTP class describes network time protocol configuration for a network. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters: servers (list of str) – NTP.servers contains a list of servers in priority order that clients can use for network time protocol. This attribute was added in vSphere API 8.0.0.1.

class com.vmware.vcenter.namespace_management.networks.service_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance